If you’re reading this article, you’re probably dealing with some strange VoIP issues that are driving you or one of your customers insane.
Maybe something like:
Basically, something weird in the behavior of the call that’s not really related to the audio quality itself. If this sounds like what you’re going through, then there’s a good chance you’re dealing with a SIP ALG - a sneaky, typically un-needed network feature that destroys VoIP calls and exists on almost ALL internet modems, routers and firewalls. It even exists in some managed switches. And by default!
Now don’t get me wrong; ISPs, firewalls, VoIP devices and not-so-IT admins are sometimes to blame too. Even still, SIP ALGs are the enemy in this article.
In simple terms, it’s a networking feature that reads, manipulates and re-writes SIP messages between VoIP devices on your network with private addresses and a VoIP service in the Cloud with a public address. It’s supposed to help VoIP calls connect better and resolve NAT related issues. Instead, they almost always create problems. And because SIP ALGs are not standardized, they all modify SIP packets in unexpected ways making your VoIP calling experience wildly unpredictable.
I don’t know. Perhaps they have a dark sense of humor. Or maybe they don’t use the internet and see all the pain and suffering they’re causing for customers, IT admins and VoIP providers.
Either way, if you’re currently experiencing any of the issues listed above, here are some tools and tips for detecting and disabling a SIP ALG that may be bothering you.
This has to be your first step. It’s the fastest and easiest way to check if you’re on the right track. A quick google search for “SIP ALG detector” will find you a couple web tests and client-based tools that can check for you – like this one on our support site. Make sure to run the test using a PC on the same network as the affected VoIP device. Being on a different cable run, VLAN, subnet, managed switch port, etc… could route your test traffic through a different path leading to inaccurate results.
If the test confirms your indeed suffering from the SIP ALG blues, then that’s great news! Now that you know the problem is, you can start fixing it. However, if the test is negative, I’d still stay suspicious. Double-check that you’re definitely on the same network, subnet, etc. as the VoIP device. Either way checking the SIP ALG settings described below won’t hurt and may help find other solutions along the way.
Every router is different so you will need to refer to the instructions for your make and model. We have a list of instructions for some common routers on our kb. If we don’t have your router a little google searching often finds you the answer. Try searching for something like “Disable SIP ALG {vendor} {model}”. After this you can run the test again, but you’ll still need to check any internet modems that may exist.
In most cases buying and installing your own modem is the BEST option here. First off, it gives you much better control of your network. And by having your own modem the ISP can’t force certain settings or features that may not align with your networking or security needs. Second, it’s much cheaper. In most cases, a great modem cost under $100 on Amazon vs renting it from the ISP for $15-20 per month. Third, the ISP can’t accidentally reverse settings they or you may have applied manually. This happens all the time when they push out global updates in the middle of the night. Default settings get re-applied making prior issues return without notice. Before buying a new modem make sure to check your ISPs support page for compatible models.
If replacing the modem now isn’t an option, disabling the SIP ALG on the modem is usually possible. Just like routers, every modem is different. Try searching for instructions for your make and model using the method above. However, this setting change often requires the ISPs support. This means contacting their help desk and requesting that they disable the feature for you.
Some words of wisdom here… Never trust the technician. Seriously, they mean well but they’re not as techie as a technician should be. After the support agent claims they disabled it run the SIP ALG client-based test again and check for yourself. Before they hang up!
One more word of caution… Just like I mentioned above, its not uncommon for modems to receive updates and clobber any settings that you or even the ISPs support agents may have applied. If any issues mysteriously return, quickly run the test again.
Most small business customers won’t have this scenario, but some layer 3 managed switches are known to have a built-in SIP ALG as well. If you have one of these devices your likely have more sophisticated networking needs and experience. Either way, the options are the same. Find your instructions and get it disabled.
Hopefully, these tips and instructions helped fix your problem and eliminated any pesky SIP ALGs affecting your service. If not, I’m sorry, and your troubleshooting journey isn’t over. The good news is that RingLogix has a lot of experience with SIP AGL issues and can resolve your problem if you're a customer.
Don't settle for 15%-20% sales commissions. Grow your business faster with the white label platform that allows you to achieve margins up to 70% . Get more time, more control, and more money with RingLogix.
About us: RingLogix offers a white label VoIP platform - RingOS - that enables Partners to sell, provision, invoice, and support their own branded VoIP and UC services. We make becoming a VoIP provider easy with a managed VoIP switch, instant order activations, hassle-free number porting, multiple services, and a flexible billing system.